| PRODUCTS |
|
| |
|
| |
Platinum gas radiant heaters are revolutionising the commercial outdoor & indoor heating industry by introducing groundbreaking benefits never seen before in traditional gas or electric heaters. Platinum heaters have set the industry benchmark with stylish good looks and world-first innovation. |
|
| Platinum heaters are in a class of their own and excel in: |
|
|
| AESTHETICS |
- Stylish and unique design
- Patented
- Slim and streamlined
- Attractive tinted translucent ceramic medium
- Brushed stainless steel finish
|
|
|
|
| |
click image to enlarge |
click image to enlarge |
click image to enlarge |
CLASS OF ITS OWN
Never has a gas radiant heater provided aesthetic appeal like the Platinum Heating Series. The heater is a design element in its own right. |
|
EASY ON THE EYE
The tinted ceramic medium transforms the obtrusive red glare emitted by the burners into a soft red glow which semantically conveys a feeling of warmth. This softened glow is a significant aesthetic improvement not seen in any other gas radiant heaters. |
|
| |
|
| INNOVATION |
- Easy-pivot arm to adjust the direction of heat provides greater versatility and heat coverage
- Electronic ignition at the touch of a button
- Wind resistant - burners protected behind translucent ceramic medium
- Even and comfortable heat distribution
HEAT AN ENTIRE VENUE BY PRESSING ONE SWITCH
One or multiple units can be switched on and off simultaneously from a single remote-located switch. |
|
| |
|
|
|
| |
|
| HIGH-PERFORMANCE |
- 42Mj or 25Mj directional heating power
- Heats up to 20 square metres:
- 300 Series up to approx. 12 sqm
- 500 Series up to approx. 20 sqm
|
|
|
click image to enlarge |
|
|
| |
|
| FLEXIBILITY & COST-EFFECTIVENESS |
- Effective utilisation of gas
- Heats large areas quickly and efficiently
- 3-tile and 5-tile models available
- Connects to a main gas connection
- Available in LPG or Natural Gas
- Suitable for commercial outdoor and indoor use, and domestic outdoor use
|
|
|
| |
|
|
|
|
|
| ACCESSORIES |
|
| CEILING POLE |
The dual-directional ceiling mount pole offers greater heater-positioning versatility in larger open areas:
- Dual or single heater mounting
- Customised pole length to cater for varied ceiling heights
- Adjustable mounting bracket to suit most installations
|
|
|
click image to enlarge |
|
|
|
| HEAT DEFLECTOR |
- Heat deflector allows for low-clearance installations
|
|
| |
|
|
|
| TECHNICAL SPECIFICATIONS |
|
| SPECIFICATION TABLE |
| |
300 SERIES |
500 SERIES |
| Part Number |
LPG: 2620130* |
LPG: 2620140* |
|
Natural Gas: 2620131* |
Natural Gas: 2620141* |
| Heating tiles |
3 |
5 |
| Heat Output (on both LPG and NG) |
25Mj |
42Mj |
| Approximate area heated (sqm.) |
up to 12 sqm. |
up to 20 sqm. |
| Gas connection |
3/8" SAE |
3/8" SAE |
| Electrical connection |
240V, 3-pin insulated plug |
240V, 3-pin insulated plug |
| Dimensions (W x D x H mm) diagram |
560 x 382 x 428mm |
756 x 382 x 428mm |
| Minimum distance to combustible materials |
Above (to ceiling): 1100mm |
Above (to ceiling): 1100mm |
|
Sides: 1100mm |
Sides: 1100mm |
| Mounting height requirement to ground |
2500mm^ |
2500mm |
| Weight (kg) |
15kg |
18kg |
*Must only be installed by a licensed technician
|
|
| ^2500mm or may be lower depending on state technical regulations. |
|
|
| |
| INSTALLATION REQUIREMENTS |
- These installation clearance requirements are for both the 300 and 500 Series models
- IMPORTANT: minimum distance from combustible materials is 1100mm (unless using a heat deflector, in which case the minimum distance above the heater is reduced to 350mm - *350mm height is subject to change pending regulatory data).
|
 |
CLICK HERE for the Installation Clearance Requirements Diagram
|
back to top |
| |
|
